Aluprof AL-RSP 01 Manual de programação - Página 3
Procurar online ou descarregar pdf Manual de programação para Controlador Aluprof AL-RSP 01. Aluprof AL-RSP 01 6 páginas. Underplaster radio controller
Imprimir página4. CHANGING THE OPERATING MODE (MOTOR / LIGHTING)
While the power supply is ON press
5x the PROG programming
button , which will be
confirmed by the LED.
5. MODE OF ROLLER MOTOR OPERATION
5.1. PROGRAMMING OF THE FIRST TRANSMITTER
I
By turning on power supply
Turn on the power, which will be
confirmed by
the UP-DOWN movement.
II
With the programming button
While the power supply is ON press
3x the PROG programming
button , which will be confirmed by
the LED.
III
With a switch
While the power supply is
ON quickly 3x press the button "UP"
or "DOWN" on the switch, which will
be confirmed by a short voltage
supply to the W1 or W2 output.
We reserve the right to any technical change.
Valid on 2022.05.23
PROGRAMMING MANUAL FOR UNDERPLASTER RADIO CONTROLLER AL-RSP 01
The LED flashes twice in
color of the current mode
and then twice in the color of
the new mode.
In the interval of two seconds
press the "P2" button twice,
which will be confirmed by the
UP-DOWN movement
In the interval of two seconds
press the "P2" button twice,
which will be confirmed by the
UP-DOWN movement
In the interval of two seconds
press the "P2" button twice,
which will be confirmed by the
UP-DOWN movement
RED COLOUR
Mode of roller shutter operation
GREEN COLOR
Mode of lightning control operation
Press "UP" button, which
will be confirmed by the UP-
DOWN movement.
Press "UP" button, which
will be confirmed by
the UP-DOWN movement.
Press "UP" button, which
will be confirmed by the UP-
DOWN movement.
The transmitter has been added.
The transmitter has been added.
The transmitter has been added.
3