Aluprof AL-RSP 01 Manual de programação - Página 5
Procurar online ou descarregar pdf Manual de programação para Controlador Aluprof AL-RSP 01. Aluprof AL-RSP 01 6 páginas. Underplaster radio controller
Imprimir página6. MODE OF LIGHTNING CONTROL OPERATION
6.1. PROGRAMMING OF THE FIRST TRANSMITTER
I
By turning on power supply
Turn on the power, which will be
confirmed by a short voltage
supply to the W1 or W2
output.
II
With the programming button
While the power supply is ON press
3x the PROG programming
button , which will be confirmed by
the LED.
III
With a switch
While the power supply is
ON quickly press 3x "UP" or "DOWN"
button on the switch, which will
be confirmed by a short voltage
supply to the W1 or W2
output.
6.2. ADDING ANOTHER TRANSMITTER
Press "P2" button twice of the already
programmed transmitter, which
will be confirmed by a short
voltage supply to the W1 or W2
output.
We reserve the right to any technical change.
Valid on 2022.05.23
PROGRAMMING MANUAL FOR UNDERPLASTER RADIO CONTROLLER AL-RSP 01
In the interval of two seconds
press the button
"P2" (1xP2 for W1, 2xP2 for W2),
which will be confirmed by
applying brief voltage pulses
to the output W1 or W2
In the interval of two seconds
press the button
"P2" (1xP2 for W1, 2xP2 for W2),
which will be confirmed by
applying brief voltage pulses
to the output W1 or W2
In the interval of two seconds
press the button
"P2" (1xP2 for W1, 2xP2 for W2),
which will be confirmed by
applying brief voltage pulses
to the output W1 or W2
Press the "P2" button of
the new transmitter,
which will be confirmed
by a short voltage supply to the
W1 or W2 output.
Press "UP" button , which
will be confirmed by a short
voltage supply to the
W1 or W2 output.
Press "UP" button , which
will be confirmed by a short
voltage supply to the
W1 or W2 output.
Press "UP" button , which
will be confirmed by a short
voltage supply to the
W1 or W2 output.
The transmitter has been added.
The transmitter has been added.
The transmitter has been added.
The transmitter has been added.
5