DLSIN DLA012NAS 사용자 빠른 설명서 - 페이지 6
{카테고리_이름} DLSIN DLA012NAS에 대한 사용자 빠른 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DLSIN DLA012NAS 18 페이지. 3.5” sata hdd
페이지 인쇄Network-IP Setting
Displays Internet Protocol information, and allows you to automatically, or manually set a
static Internet Protocol address Information therein.
By Default the Internet Protocol Information is set to Automatic IP. If you would prefer to
manually set your internet protocol address place a bullet in Static IP address and fill in
your information accordingly in the fields below, then click the apply button.
If you have selected Automatic IP:
The IP Information will be displayed in the specified fields, please take note while in this
mode the IP address of the unit is obtained through DHCP and may change at any time.
If you have selected Static IP as below:
Enter your desired IP information in each specified field and click Apply.
10
Note: For detailed information regarding the best configuration for your network, please
contact your network administrator.
Network-PPPOE
Enables you to connect your enclosure directly to the Internet via a PPPoE (Point-to- Point
Protocol over Ethernet) Internet Service Provider.
To setup, enter the username and password provided by your Internet Service
provider into the specified fields and click the apply button.
Note:
Service Name is an option field used for your personal identification of the ISP.
The Service Name will not impact your connection.
The service on Demand field allows you to specify whether you would prefer the service to
connect automatically or on manually.
Auto Dial-Up
DISABLE
11