Ashcroft GC52 제품 정보 페이지

{카테고리_이름} Ashcroft GC52에 대한 제품 정보 페이지을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashcroft GC52 8 페이지. Differencial pressure transmitter

Product Information Page

PROGRAMMING USER DEFINED FLOW RATE UNITS ON THE GC52

DIFFERENCIALPRESSURE TRANSMITTER

The GC52 differential pressure transmitter is compact and flexible

instrument often used in flow measurements and volume applications. It

can be easily programmed with user defined units to display flow rate in

Gallons Per Minute (GPM) and volume in gallons.

Water Flow Rate and Volume Application:

This example demonstrates the use of GC52 differential pressure transmitter to measure and control

flow rate in GPM. Also, to switch from flow rate reading to volume, automatic or manual. Although, the

GC52 differential pressure transmitter can be purchase with several ranges, for this application a

transmitter with 0 to 40 IWC pressure range has been selected. As well, an orifice plate with 2.40" bore,

an eight-inch line diameter pipe and a variable frequency water pump. The transmitter shall provide the

analog output to the variable frequency water pump. The variable frequency water pump uses the 4-

20mA input to control the amount of energy sent to the pump to slow down or speed up the pump to

maintain a constant flow of 65 GPM.

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

Figure 1 – GC52 Differential Pressure Transducer

ashcroft.com

info@ ashcroft.com

1.800.328.8258

PIP #: TR-PI-102

Applicable to:

GC52

Rev. A 02/17, Page 1 of 8