Ashcroft GC52 제품 정보 페이지 - 페이지 3

{카테고리_이름} Ashcroft GC52에 대한 제품 정보 페이지을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashcroft GC52 8 페이지. Differencial pressure transmitter

Product Information Page

Principles of Operation and Program Instructions:

Flow rate is calculated by using Bernoulli's equation below by measuring the differential pressure across

an orifice plate. The GC52 will be using the orifice plate manufacturer's data of maximum flow rate with

corresponding differential pressure drop.

∆

= √

∆ =

Manufacturer orifice plate specifications:

= 8"

= 2.4"

= 88 @ 20

GC52 Differential Pressure Transducer Flow and integrated Volume Program Guidelines:

Below is an Illustration to program the transmitter in GPM and integrated volume in gallons as the

arbitrary units. Proceed to scale down the transducer range from 40 IWC to 20 IWC. That, is the

maximum differential pressure equivalent to 88 GPM of water (20 mA). Follow the steps below to

rescale and program the transmitter from 0 to 20 IWC of water equivalent to the arbitrary units of 0 to

88 GPM.

Remove Access Cover to Expose MODE, UP and DOWN Buttons



Press and hold M button for more than three seconds to get into program

mode.



Press UP or Down arrow to make changes.



Press and release M button to select changes and to walk through the menu.



Continue to step-1 after power-on message.



Press and hold M button anytime for more than three seconds to return to

measuring mode.

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

ashcroft.com

info@ ashcroft.com

1.800.328.8258

Rev. A 02/17, Page 3 of 8