Cypress PowerSoC CY3267 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Cypress PowerSoC CY3267에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress PowerSoC CY3267 12 페이지. Lighting evaluation kit

3.2 Connect the Main Board to PC

The Main Board has a CY8C24894 device that provides USB interface to the kit. Use

the USB cable provided with the kit to connect the Main Board to a PC. Install the

'Intelligent Lighting Control' GUI from the Kit CD. Refer to

2.1 GUI Installation Require-

ments

for install instructions.

3.3 Main Board Power Supply Jumper Settings

Ensure that the headers marked VDD and VREG (J3 on the Main Board) are shorted

using a 100-mil jumper.

3.4. Powering the Main Board

The Kit contains a 12V DC/2A Power Supply. Connect this into the wall-wart connector

marked J1 on the Main Board. Alternatively, you can use a regular lab DC power sup-

ply configured for up to 32V/4A, and connect the input to the screw terminals marked

J2.

3.5. Mounting the optical diffuser on the LED Daughter Board

The kit includes an optical diffuser that can be mounted on the LED to generate an

optimally mixed output color from the four individual colors. Place the diffuser with the

tapering end sitting around the LED on the daughter board.

Figure 4

shows how the

optical diffuser is mounted on the LED daughter board.

Figure 4 Optical diffuser Mounted on LED Daughter Board

Page 7