Ashly MQX-2310 운영 매뉴얼 - 페이지 5
{카테고리_이름} Ashly MQX-2310에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly MQX-2310 13 페이지. Graphic equalizer
Ashly MQX-2310에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (12 페이지), 기술 노트 및 사양 (2 페이지)
페이지 인쇄
Operator Manual – MQX-2310 Equalizer
MQX Equalizers
MQX equalizers use "Q" enhanced Wein bridge filters and interleaved summing for constant
"Q", low ripple, and minimum filter interaction. A servo-balanced output stage simulates a
true transformer output to allow interfacing with virtually any type of load.
.
Connectors & Cables
Your MQX series equalizer is provided with three different connector types:
1. 1/4 inch stereo phone jacks (TRS)
2. Three pin XLR type connectors
3. Euroblock screw terminal connectors
These connectors will allow interfacing to most professional audio products. Inputs as well
as servo-balanced outputs can be used balanced or unbalanced. When possible, balanced
connections are recommend between all components in your system, as this eliminates
ground-loop induced hum and noise.
Unbalanced Connections and Grounding
If you must use unbalanced connectors, the negative lead of the connector should be tied to
the ground lead. Using unbalanced connections could result in chassis ground-loop noise.
Altering the signal/chassis ground relationship in equipment connected to your MQX unit
may eliminate the noise.
All Rights Reserved
Page - 5
Introduction – 4
GQX Equalizers – 5
Connectors & Cables – 5
Grounding
Physical Description - 6
Installation – 7
Typical Applications - 8
Troubleshooting - 9
Dimensions - 9
Specifications - 10
Warranty - 11