Ashly MQX-2310 Kullanım Kılavuzu - Sayfa 5
Kayıt Ekipmanları Ashly MQX-2310 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly MQX-2310 13 sayfaları. Graphic equalizer
Ayrıca Ashly MQX-2310 için: Broşür (1 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (12 sayfalar), Teknik Notlar & Özellikler (2 sayfalar)
Sayfayı Yazdır
Operator Manual – MQX-2310 Equalizer
MQX Equalizers
MQX equalizers use "Q" enhanced Wein bridge filters and interleaved summing for constant
"Q", low ripple, and minimum filter interaction. A servo-balanced output stage simulates a
true transformer output to allow interfacing with virtually any type of load.
.
Connectors & Cables
Your MQX series equalizer is provided with three different connector types:
1. 1/4 inch stereo phone jacks (TRS)
2. Three pin XLR type connectors
3. Euroblock screw terminal connectors
These connectors will allow interfacing to most professional audio products. Inputs as well
as servo-balanced outputs can be used balanced or unbalanced. When possible, balanced
connections are recommend between all components in your system, as this eliminates
ground-loop induced hum and noise.
Unbalanced Connections and Grounding
If you must use unbalanced connectors, the negative lead of the connector should be tied to
the ground lead. Using unbalanced connections could result in chassis ground-loop noise.
Altering the signal/chassis ground relationship in equipment connected to your MQX unit
may eliminate the noise.
All Rights Reserved
Page - 5
Introduction – 4
GQX Equalizers – 5
Connectors & Cables – 5
Grounding
Physical Description - 6
Installation – 7
Typical Applications - 8
Troubleshooting - 9
Dimensions - 9
Specifications - 10
Warranty - 11