Asko DW95 매뉴얼 - 페이지 17

{카테고리_이름} Asko DW95에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko DW95 19 페이지.

페이지 인쇄

WATER SOFTENING

The water softener operates as follows:

During rinse, pre-wash and main wash:

1. Inlet valve 1 opens and admits water.

2. The water flows

• through hose 3 to air-brek device, no 1

• passes an airgap

• leaves the air-break device through no. 3

• passes hose 7 to the resin container of the

softener, no 3.

There the water is softened and the soft water

flows

• out through no. 4

• through hose 8 back to the air-break device no. 4

• enters the machine through no. 6.

1 Inlet valve 1

2. Inlet valve 2 (regener ation valve)

3. Hose IV1 - air-break device

4. Hose IV2 - air-break device

5. Air-break device

6. Inlet opening

7. Hose air-break device no. 3- resin

container no.3

8. Hose air-break device no. 4 – resin

container no. 4

9. Hose air-break device no. 5 - salt

container no. 5

10. Salt container

11. Resin container

Ca(HCO )

3 2

Regeneration during the main wash:

3. When the machine has admitted water, as described above, for the main wash,

inlet valve 2 opens for 10-60 seconds, depending on the setting. The water flows

through hose 4 to the air-break device 5, on through hose 9 and into salt container no. 5.

The salt-saturated water flows into the resin container, where it regenerates the resin, so

that it can soften further water.

DW 953, 954, 955, 95FI

Resin container

Hard water, containing lime,

Ca(HCO

)

flows into the

resin container. The Ca ions

are replaced by Na. Soft

water, containing Na(HCO

flows into the machine.

)

Na(HCO )