Ambient Weather WS-09 사용자 설명서 - 페이지 2

{카테고리_이름} Ambient Weather WS-09에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-09 15 페이지. 8-channel wireless refrigerator/freezer thermometer

페이지 인쇄

1 Introduction

Thank you for your purchase of the Ambient Weather WS-09 8-Channel Wireless Refrigerator/Freezer

Thermometer. The following user guide provides step by step instructions for installation, operation

and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit:

The probe thermometer allows you to measure the temperature inside a refrigerator or freezer, while

mounting the display on the outside of the refrigerator/freezer.

Wireless signals cannot pass through a metal barrier. If your refrigerator/freezer is constructed of

metal, the probe will have to be placed inside the refrigerator/freezer and the display/transmitter

outside the refrigerator/freezer.

In addition to the refrigerator/freezer application, the probe thermometer can be placed in any medium

where temperature is required, including ground temperature, air temperature and water temperature.

2 Getting Started

Note: The power up sequence must be performed in the order shown in this section (insert

batteries in the remote transmitter(s) first, Display Console second).

The WS-09 weather station consists of a display console (receiver), and two probe thermometers for

the refrigerator/freezer.

Parts List

QTY

Display Console

Frame Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in

LCD Dimensions (LxW): 3.75 x 3.50"

LCD Segment Height: 1.25 inches

Probe thermometer transmitter with probe (FT007TP) for refrigerator/freezer

Dimensions (LxHxW): 4.5" x 2.0" x 0.75"

Suction cup mounts

2.1 Probe Thermometer Sensor Set Up

Note: Do not use rechargeable batteries. We recommend fresh alkaline batteries for temperature

ranges between -4 °F and 140 °F and fresh lithium batteries for temperature ranges between -40 °F

and 140 °F.

Version 1.0

http://ambientweather.wikispaces.com/ws09

Item

Page 2