Ambient Weather WS-09 사용자 설명서 - 페이지 6
{카테고리_이름} Ambient Weather WS-09에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-09 15 페이지. 8-channel wireless refrigerator/freezer thermometer
페이지 인쇄
1. Channel 1 Indicator
2. Reception Icon (solid when searching,
flashes when updating)
3. Channel Selector
4. Channel 1 Temperature
5. Temperature units (°F or °C)
6. Max Temperature Indicator
7. Temperature Alarm
8. Maximum Temperature, Channel 1
9. Minimum Temperature, Channel 1
10. Maximum Temperature, Channel 2
11. Minimum Temperature, Channel 2
12. Maximum Temperature, Channels
3,4,5,6,7,8,
indictor
2.2.2 Sensor Operation Verification
Verify the temperature sensors match closely with the console and sensor array in the same location
(about 5 to 10' apart). The sensors should be within 2°F (the accuracy is ± 1°F). Allow about 30
minutes for both sensors to stabilize. The temperature can be adjusted or calibrated later to match each
other or a known source.
3 Remote Sensor Installation
The remote probe sensors have many applications, including measuring inside/outside air temperature,
water temperature, soil or ground temperature and refrigerator / freezer temperatures.
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Figure 5
13. Low battery indicator
14. Minimum Temperature, 3,4,5,6,7,8,
15. Min Temperature Indicator
16. Indoor Temperature Indicator
17. Temperature, Channels 3,4,5,6,7,8,
18. Scroll mode indicator
19. Channel indicator
20. Low battery indicator
21. Channel 2 Temperature
22. Channel 2 Indicator
23. Low battery indicator
indictor
Page 6