Flomec QS200 Product Owners Manual - Page 9

Browse online or download pdf Product Owners Manual for Measuring Instruments Flomec QS200. Flomec QS200 16 pages. Insertion ultrasonic flowmeter options for large pipe sizes
Also for Flomec QS200: Installation Manual (8 pages), Product Owners Manual (20 pages)

Print Page

INSTALLATION ( CONTINUED )

Place the marked sleeve back into saddle, engaging the threaded studs to the depth

marked. Twist the bottom nuts upward to bottom of sleeve flange, replace the two nuts

removed earlier and tighten all nuts with 7/16 wrench. See Figure 5.

TIGHTEN DOWNWARD

TIGHTEN UPWARD

PERMANENT MARK

Figure 5

Step 4 – Mounting the Sensor:

Note the flow arrows on the side of the sensor, these must point downstream. Insert sensor

into sleeve, press down until hole in sensor matches hole in sleeve. Insert retention pin.

Final sensor depth should match that shown in Figure 6.

.060

.030

Figure 6

TIGHTEN DOWNWARD

TIGHTEN UPWARD