Aktakom ATK-2011 User Manual - Page 8

Browse online or download pdf User Manual for Measuring Instruments Aktakom ATK-2011. Aktakom ATK-2011 11 pages. Clamp meter

Print Page

III.2.1. True RMS value of AC Voltage

a. Set the sliding switch at position V.

b. Insert the test leads into the input jack. Connect the test prods of the test leads in PARALLEL to the circuit to

be measured.

c. Read the measured RMS value from the LCD display.

NOTE: If the true RMS value is less than 10V, the frequency of the signal will be displayed as 0 (Please refer to the

following figure).