Amprobe AMB-45 Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Test Equipment Amprobe AMB-45. Amprobe AMB-45 13 pages.

Print Page

VI. AUTO POWER OFF

When the tester is idle for thirty minutes, with no function selector

or button operation, it will turn itself off automatically. To turn the

tester on again, the user has to turn the function selector to "OFF"

position, then the selected function.

VII. BATTERY CHANGING

When

appear on the LCD, the battery need to be replaced with

new ones. To replace the battery the user should turn the function

selector to OFF position. Then the user needs to open the battery

compartment cover with a screwdriver. Eight AA 1.5V batteries are

needed to replace the old ones. After all Batteries are changed,

put the cover back and fasten the screw.

VIII. FUSE CHANGING:

When connect the meter under Ohm rang to a source > 10V, the

protection fuse will break the circuit and new one will be needed

for replacement. To replace the fuse, user should prepare an F

0.5A 600V fuse. First, the user should turn the tester off and

remove the test leads then remove the Back Cover and Replace

the fuse.

amb 45