AMQ ACTIV DT Riser Assembly Manual - Page 4

Browse online or download pdf Assembly Manual for Indoor Furnishing AMQ ACTIV DT Riser. AMQ ACTIV DT Riser 9 pages.
Also for AMQ ACTIV DT Riser: Installation Manual (5 pages), Installation Manual (8 pages), Troubleshooting Manual (2 pages)

Print Page
AMQ ACTIV DT Riser Assembly Manual

INSTALLATION

Step 1
Use M6X14 screws (x4) to assemble base to
column. Wire the column to the control box.
M6X14
Step 3
Slide the primary worksurface over
the column and set column to lowest
position.
Step 5
Use M6X12 screws (x4) to attach monitor
holder to top of column. Remove the M4X10
screw under the monitor holder to release
the VESA plate. Attach the VESA plate to the
monitor and resecure to monitor holder with
the M4X10 screw.
NOTE:
1. For single monitor mount, the maximum monitor size allowed is 43" and maximum
weight capacity for monitor is 20 lbs.
2. For safety and avoiding product tipping, if keyboard tray is to be assembled, please
assemble the keyboard tray first before installing the monitor mount and monitor.
ACTIV DT RISER ASSEMBLY GUIDE | 4
Step 2
Use M6X8 screws (x4) to assemble the support
plate to pre-drilled holes at the bottom of column.
M6X8
Step 4
Wire the handset to the control box and plug in the
power cord.
Raise the column at least 8 inches. Use M6X25 screws
(x4) to mount te primary worksurface to support plate.
The maximum weight capacity
NOTE:
for primary worksurface is 55 lbs.
M6X12
M6X25
M4X10
amqsolutions.com