AMQ ACTIV DT Riser Montagehandleiding - Pagina 4

Blader online of download pdf Montagehandleiding voor {categorie_naam} AMQ ACTIV DT Riser. AMQ ACTIV DT Riser 9 pagina's.
Ook voor AMQ ACTIV DT Riser: Installatiehandleiding (5 pagina's), Installatiehandleiding (8 pagina's), Handleiding voor probleemoplossing (2 pagina's)

INSTALLATION

Step 1

Use M6X14 screws (x4) to assemble base to

column. Wire the column to the control box.

M6X14

Step 3

Slide the primary worksurface over

the column and set column to lowest

position.

Step 5

Use M6X12 screws (x4) to attach monitor

holder to top of column. Remove the M4X10

screw under the monitor holder to release

the VESA plate. Attach the VESA plate to the

monitor and resecure to monitor holder with

the M4X10 screw.

NOTE:

1. For single monitor mount, the maximum monitor size allowed is 43" and maximum

weight capacity for monitor is 20 lbs.

2. For safety and avoiding product tipping, if keyboard tray is to be assembled, please

assemble the keyboard tray first before installing the monitor mount and monitor.

ACTIV DT RISER ASSEMBLY GUIDE | 4

Step 2

Use M6X8 screws (x4) to assemble the support

plate to pre-drilled holes at the bottom of column.

M6X8

Step 4

Wire the handset to the control box and plug in the

power cord.

Raise the column at least 8 inches. Use M6X25 screws

(x4) to mount te primary worksurface to support plate.

The maximum weight capacity

NOTE:

for primary worksurface is 55 lbs.

M6X12

M6X25

M4X10

amqsolutions.com