Bosch Ascenta SHE5AM02UC Repair Instructions - Page 10
Browse online or download pdf Repair Instructions for Dishwasher Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 pages. Quick reference instructions
Also for Bosch Ascenta SHE5AM02UC: Installation Instructions Manual (21 pages), Energy Manual (2 pages), Get Started (2 pages), Repair Instruction (27 pages)
Print Page
4
COMPONENTS
4.1
Control and power modules
Ascenta dishwashers have two control modules, a control module
(with display, lights & buttons) in the fascia (control) panel and a
power module in the base on the right side. The power module
controls the BLDC drain pump and heat pump.
The wire harness connected to the control module can either be a
separate harness or the 1-piece dishwasher harness, depending
on when the dishwasher was built. The wiring is the same, with
the only difference being whether the dishwasher has three
harnesses or one harness.
702_58300000130262_ara_en_c
1
1. Control module (in fascia panel)
2. Power module (in base)
4.2
Door latch
The door latch is mounted on top of the tank and doesn't contain
a microswitch. It uses a Hall-effect sensor in the door to sense
the door latch magnet to determine if the door is open or closed.
The Hall-effect sensor is held by two T-10 Torx screws. The door
latch is held by one T-20 Torx screw and two tank tabs.
1. Door latch
2. Hall effect sensor
2
Starting FD8907, the small door latch face plate has been
integrated into the tray insert (and can't be obtained separately).
1. Newer integrated face plate
2. Older separate face plate
2
1
1
2
Page 10 of 50