Bosch Ascenta SHE5AM02UC Інструкція з ремонту - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Посудомийна машина Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 сторінок. Quick reference instructions
Також для Bosch Ascenta SHE5AM02UC: Інструкція з монтажу Посібник з монтажу (21 сторінок), Енергетичний посібник (2 сторінок), Початок роботи (2 сторінок), Інструкція з ремонту (27 сторінок)

COMPONENTS

4.1

Ascenta dishwashers have two control modules, a control module

(with display, lights & buttons) in the fascia (control) panel and a

power module in the base on the right side. The power module

controls the BLDC drain pump and heat pump.

The wire harness connected to the control module can either be a

separate harness or the 1-piece dishwasher harness, depending

on when the dishwasher was built. The wiring is the same, with

the only difference being whether the dishwasher has three

harnesses or one harness.

702_58300000130262_ara_en_c

1. Control module (in fascia panel)

2. Power module (in base)

4.2

The door latch is mounted on top of the tank and doesn't contain

a microswitch. It uses a Hall-effect sensor in the door to sense

the door latch magnet to determine if the door is open or closed.

The Hall-effect sensor is held by two T-10 Torx screws. The door

latch is held by one T-20 Torx screw and two tank tabs.

1. Door latch

2. Hall effect sensor

Starting FD8907, the small door latch face plate has been

integrated into the tray insert (and can't be obtained separately).

1. Newer integrated face plate

2. Older separate face plate

Page 10 of 50