Bosch Ascenta SHE5AM02UC 수리 지침 - 페이지 10

{카테고리_이름} Bosch Ascenta SHE5AM02UC에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Ascenta SHE5AM02UC 50 페이지. Quick reference instructions
Bosch Ascenta SHE5AM02UC에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (21 페이지), 에너지 매뉴얼 (2 페이지), 시작하기 (2 페이지), 수리 지침 (27 페이지)

페이지 인쇄
Bosch Ascenta SHE5AM02UC 수리 지침
4

COMPONENTS

4.1

Control and power modules

Ascenta dishwashers have two control modules, a control module
(with display, lights & buttons) in the fascia (control) panel and a
power module in the base on the right side. The power module
controls the BLDC drain pump and heat pump.
The wire harness connected to the control module can either be a
separate harness or the 1-piece dishwasher harness, depending
on when the dishwasher was built. The wiring is the same, with
the only difference being whether the dishwasher has three
harnesses or one harness.
702_58300000130262_ara_en_c
1
1. Control module (in fascia panel)
2. Power module (in base)
4.2

Door latch

The door latch is mounted on top of the tank and doesn't contain
a microswitch. It uses a Hall-effect sensor in the door to sense
the door latch magnet to determine if the door is open or closed.
The Hall-effect sensor is held by two T-10 Torx screws. The door
latch is held by one T-20 Torx screw and two tank tabs.
1. Door latch
2. Hall effect sensor
2
Starting FD8907, the small door latch face plate has been
integrated into the tray insert (and can't be obtained separately).
1. Newer integrated face plate
2. Older separate face plate
2
1
1
2
Page 10 of 50