Bosch 800 Series Use And Care Manual - Page 20

Print Page

3. The timer value blinks, indicating it can be edited. Input

the new time and restart the timer by pressing the

Enter touchpad.

The oven timer may be cleared by entering 0:00.

Special Features

The special features provide you with additional

conveniences when cooking.

Learn more about these special features in the following

sections:

•

Probe (some models)

•

Sabbath Mode

•

Panel Lock

Probe (some models)

The probe measures the internal temperature of the food.

The probe is available for Bake, Roast and all convection

cooking modes.

Remove Safety Cap before Using Probe

Some models include a temperature probe used to sense

internal tempererature of meats during cooking.

The probe ships with a black plastic safety cap over the

pointed metal end of the probe. The cap must be removed

prior to use.

Inserting the probe:

Insert the tip of the probe in the middle and thickest part of

the meat. Make sure the probe is not touching fat, bone, or

parts of the oven or the pan.

Note: Food must be completely thawed before inserting

the probe into the meat.

English 17

To use the probe:

1. Insert the probe into the meat as described above. The

probe symbol is displayed.

2. Connect the probe to the oven. If the probe is not

connected to the oven prior to starting Probe mode, an

error tone sounds and the message "INSERT PROBE"

is displayed.

3. Set the cooking mode and temperature.

4. The Set Probe Temp screen is displayed. A three digit

input prompt "- - -" blinks in the lower right corner. Use

the numeric keypad to enter the desired probe

temperature and press Enter on the numeric keypad.

Note: The minimum probe temperature that can be set

is 100° F (40° C) and the maximum is 200° F (100° C).

If the probe temperature entered is outside this range,

an error is displayed.

5. The probe current temperature and target temperature

are both displayed in the format "105 / 180" at the lower

right corner of the display. The actual temperature will

display < 80 until the food temperature reaches 80° F.

The displayed probe temperature is updated in

increments of 5° during the cooking process.

6. When the probe temperature reaches the set

temperature, the cooking mode turns off. The current

time is displayed and the message "COOKING

COMPLETE" blinks at the bottom left of the display. An

alarm tone sounds every 10 seconds for 2 minutes.