Formax FD 8502AF Maintenance Manual - Page 10
Browse online or download pdf Maintenance Manual for Paper Shredder Formax FD 8502AF. Formax FD 8502AF 19 pages. Autofeed shredder
Also for Formax FD 8502AF: Operator's Manual (2 pages)
Print Page
Adjusting the AutoFeed Hopper Guide
The AutoFeed Hopper Guide is set at the factory. However, if paper is feeding incorrectly or too many sheets are being
pulled causing the shredder to jam, it may be necessary to adjust the infeed gap.
1.
Remove top case assembly.
2.
Press AutoFeed Lever and slide in a stack of 8 sheets
of 20# paper (Figure 5).
3.
To adjust Hopper Guide up or down, use a 5.5 mm nut
driver to loosen the 4 screws holding it in place (Figure
6).
4.
Press down on the Guide and slide the paper in and
out until you reach medium to light drag on the paper
stack (Figure 7).
5.
Tighten screws and replace Top Case.
AutoFeed Lever
Figure 5
Figure 6
Figure 7
6
Hopper Guide