Bosch Programme Table Installation And Operating Instructions Manual - Page 24

Browse online or download pdf Installation And Operating Instructions Manual for Dryer Bosch Programme Table. Bosch Programme Table 32 pages. Front-loading washing machine
Also for Bosch Programme Table: Instruction Manual (10 pages), Operating Instructions Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Installation And Operating Instructions Manual (32 pages), Instruction Manual (10 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instructions For Installation And Use Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Operating Instructions Manual (10 pages), Operating Instructions Manual (10 pages), Operating, Care And Installation Instructions Manual (24 pages), Operating Instructions Manual (8 pages), Instructions For Use Manual (10 pages), Instruction Manual (10 pages), Operating Instructions Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Operating, Care And Installation Instructions Manual (24 pages), Operating And Installation Instructions (29 pages), Operating Instructions Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (10 pages), Instruction Manual (8 pages)

Print Page
Bosch Programme Table Installation And Operating Instructions Manual
Included with the
appliance
Removing the transport
safety bolts
Positioning and
levelling
Number
4
Covers for openings left after removing the transport bolts.
1
1
24-40 mm dia. hose clamp for connection to a siphon.
1
2
On the back of the washer dryer:
– Water drain hose
– Water supply hose
– Mains cable with plug
– Instruction manual and booklet containing after-sales service
addresses
Moisture may remain in the drum following the final inspection which
every washer-dryer undergoes before leaving the factory.
Unscrew all four screws
using the spanner
supplied.
Insert the protective
covers.
– Appliance stability is essential to ensure that the washer dryer does not
"creep" during spin cycles.
– The installation area must be firm, clean and level.
– Parquet floors and soft floor coverings, e.g. carpets or foam-backed
floor coverings, are unsuitable.
Description
Spanner
Door template
Door hinges with screws
Remove all 4 transport safety bolts
completely and take the mains cable out of
the retainers.
– Before using the appliance for the first
time, ensure that all transport safety bolts
have been removed and kept safe for any
subsequent transport.
– If you need to transport the appliance at a
later date, always refit the transport safety
bolts to prevent damage to the washer-
dryer.
24