Anderson FFAH21 Operation Manual - Page 4

Browse online or download pdf Operation Manual for Burner Anderson FFAH21. Anderson FFAH21 8 pages.
Also for Anderson FFAH21: Operation Manual (10 pages)

Print Page

Anderson Thermal Solutions – FFA12 Burner Operation Manual

pipe or gas pipe connected with burner should be tight enough with no leakage, also

the periodically check air or fuel nozzles of the burners to prevent to be blocked by

dust, slag or other materials.

ATTENTION：DANGER OF BEEN BURNT

When burner in operation, combustion is severe, so the burner must be fixed. Hoses

or cables in area of the combustion system must be suitable for high temperature, to

prevent high temperature failure or cause safety accidents. Burners should be

periodically inspected and cleaned. Copper wire brush may be used, if necessary, to

clean burner head. The burner system should be checked twice a year for safety

operation.

4. Description

FFA12 – FlexFire® Air burner is trademark of Anderson Thermal Solutions (Suzhou) Co.,

Ltd., it is designed for regenerative glass furnace, with adjustable mechanism for flame

length and energy release position.

FFA12 fuel burner has an adjustable fuel burner designed for sealed combustion and

can use standards-compliant liquid fuels with a viscosity of 100 SSU or less, long service

life, work with heat and dirty air, and low maintenance.

It is widely used for the installation of side-fired and bottom-fired end port and cross

fire furnaces

Figure 1: Flex Fire®-Air Oil Brenner

Anderson Thermal Soluions（Suzhou）Co., Ltd