Drehmo 384771 Additional Operating Manual - Page 6
Browse online or download pdf Additional Operating Manual for Switch Drehmo 384771. Drehmo 384771 12 pages. Simc with limit switching unit
Print Page
lines up with switch and it operates, stop turning. If the cam is turned too far by mistake,
repeat the entire setting process from the beginning.
NOTICE
The signal of the potentiometer is converted into a 4 20 mA
1.3 Setting the reduction gearing for multi-turn
actuators
To reset the reduction gearing according to table 1.1, loosen the fixing screw item 4 in
figure 1.3. After unfastening the screw, the sliding wheel can be moved up (smaller angle
for the mechanical position indicator) and down (larger angle for the mechanical position
indicator). As soon as the new position of the sliding wheel has been reached, fasten the
fixing screw.
NOTICE
Observe correct position of the sliding wheel!
6
Adjust the reduction gearing to the stroke to make it run cor-
rectly
The splines of the sliding wheel must fully engage into the
counterwheel.
1. COMMISSIONING
Additional operating manual