Anova TP4600 Instructions & User's Manual - Page 8

Browse online or download pdf Instructions & User's Manual for Power Tool Anova TP4600. Anova TP4600 12 pages. Battery pruning shears

Print Page

3.6 Blade replacement

1. To ensure your safety, please remove the battery before handling the blade.2. Step by step, as shown

below, replace the blade.3. After replacement, clean the blade, turn on the scissor and test to see if

everything is correct.

1. Remove the screws with a screwdriver and open the cover.2. Remove the screws from the blade nut

retainer (this step is important)3. Remove the blade nut

4. Remove the pin and remove the moving knife5. Remove bedknife.6. When replacing the blades,

lubricating oil should be added between the blades

7. Replace the blade8. Insert the nut9. Install the lock nut

Support blade and moving blade can be replaced independently; As a replacement, don't worry

about too small a blade opening; after recovering the power of the scissor, the normal opening size will

recover automatically.

1. Do not cut branches outside the cutting range; do not cut non-vegetable materials, such as metals and

stones, etc. do not use clamps or the like to hold the scissors; Always replace the cutting blade if it is

worn or damaged.

2. Keep the cutting equipment clean, clean the scissors, batteries and charger with a clean cloth (do not

use corrosive detergents!) and a soft brush or dry cloth to clean the dust on the upper scissors.

3. Do not immerse the scissors, batteries and charger in water or other liquids;

4. Use the equipment correctly; Stop using it when there is damage to the scissor, batteries and/or

chargers.