Apollo Smoke Detector XP95 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Security System Apollo Smoke Detector XP95. Apollo Smoke Detector XP95 18 pages. Input/output unit
Also for Apollo Smoke Detector XP95: Installation & Maintenance Manual (4 pages), Installation Manual (2 pages), Installation Manuals (2 pages), Installation Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (5 pages), Installation Manual (2 pages)

Print Page

OFF

Plug

www.acornfiresecurity.com

Step by step guide to aligning and calibrating

1. Check that the cables at the interface (Fig 4 on page 6) are correctly con-

nected and switch the interface to alignment mode.

2. Power up the beam detector.

3. After ﬁ tting the transmitter and receiver as described in point 3 on page

8, loosen the transmitter so that it can be moved with slight resistance up,

down, left and right.

4. Remove the plug on the transmitter.

5. Using a 0 point cross-head or terminal screwdriver turn the potentiometer

fully anti-clockwise. This adjusts the transmitter power to maximum.

6. The transmitter must be correctly targeted at the receiver by a combination

of movements, up and down, right and left until the centre of the beam hits

the centre of the receiver.