Dataforth PWRM10-01 Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Control Unit Dataforth PWRM10-01. Dataforth PWRM10-01 20 pages. Iot energy monitoring modules

Print Page

MA1069 PWRM10-01 & PWRM20-01 Quick Start Guide

4.0 Installing the Module

Each PWRM10-01 and PWRM20-01 module is shipped in electro-static discharge (ESD) protective

packaging. Use appropriate ESD protection measures while unpacking. If physical damage is noted,

file a claim with the shipping carrier and contact the factory.

ATTENTION

Read, understand, and follow all instructions in this manual and

Hardware User Manual

the product.

CAUTION – RISK OF ELECTRICAL SHOCK

When installing and operating the PWRM10-01 and PWRM20-01 modules, there is a potential shock

hazard from dangerous high voltage. Ensure systems are de-energized before installing the product

or removing the terminal blocks.

The PWRM10-01 and PWRM20-01 modules mount on 35mm DIN rails that are elevated or flush on

panels. They require no tools or hardware for insertion into a system and only a simple flat blade

screwdriver for removal.

To install a module:

1. Orient the module with the metal latch down and the Ethernet jack away from the DIN rail

2. Align the module DIN rail capture with the top edge of the rail

3. Slide the module down until the module engages the rail

4. Rotate the module and snap in place

Figure 1: PWRM10-01 Installation and Removal from a DIN Rail

Page 4 of 16

including all warnings, cautions, and precautions before installing and using

MA1068 PWRM10 & PWRM20-01