Agri-Fab 45-02102-101 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Spreader Agri-Fab 45-02102-101. Agri-Fab 45-02102-101 16 pages. 125 lb. push broadcast spreader
Also for Agri-Fab 45-02102-101: Owner's Manual (16 pages)

Print Page

22. Place the adjustable stop into the "ON" end of

the slot in the top of the flow control mounting

bracket. Secure with the 1/4" x 3/4" carriage bolt,

a nylon washer, a 5/16" flat washer and the ny-

lon wing nut. See figure 11.

NYLON

WING NUT

5/16" FLAT

WASHER

NYLON

WASHER

FIGURE 11

ADJUSTABLE

STOP

1/4" x 3/4"

CARRIAGE BOLT

23. Position the flow control mounting bracket

(Refer to figure 12).

a. Push on flow control arm until it locks in "OFF"

position.

b. Slide flow control mounting bracket along tube

until closure plate in bottom of hopper just

closes.

c. Snug the 1/4" lock nuts just enough to hold

flow control mounting bracket in place.

d. Set adjustable stop at "5". Pull flow control

arm against stop. Verify that closure plate has

opened about half way.

e. If closure plate does not open half way, it may

be closed too far at "OFF". Adjust position of

flow control mounting bracket until closure

plate will open about half way at "5" and still

close when arm is locked in "OFF". Tighten

1/4" lock nuts.

FIGURE 12

AJDUSTABLE

STOP

SETTING "5"