DW Blackjack Cube-LX Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Server DW Blackjack Cube-LX. DW Blackjack Cube-LX 16 pages.

Print Page
DW Blackjack Cube-LX Quick Start Manual
4. Select "Use the following IP address" (Use the following DNS server addresses will be selected automatically).
5. Enter IP address and subnet mask of the camera network. (Do not enter anything for the default gateway, preferred
DNS server and alternate DNS server.
NOTE
It must be the same network as the cameras and must not be the same network as the local
network. Contact your network administrator for more information.
6. Click OK to close then click Close to go back to Network Connections.
Local Network
6. Click OK to close then click close to go back to network connections.
7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.
8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
Local Network
7. Right click on the other Ethernet, the one with network cable unplugged, and click "Properties".
6. Click OK to close then click Close to go back to Network Connections.
6. Click OK to close then click Close to go back to Network Connections.
Local Network
8. Select "Internet Protocol Version 4 (TCP/IPv4") and click "Properties".
Local Network
7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.
7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.
8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
10. Enter IP address and Subnet mask of the camera network.
9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
9. Select "Use the following IP address" (Use the following DNS server addresses will be selected automatically).
10. Enter IP address and Subnet mask of the camera network.
10. Enter IP address and Subnet mask of the camera network.
10. Enter IP address and subnet mask of the camera network.
Quick Start Guide
7