DW Blackjack Cube-LX Quick Start Manual - Page 8
Browse online or download pdf Quick Start Manual for Server DW Blackjack Cube-LX. DW Blackjack Cube-LX 16 pages.
Print Page
* Consult with your IT department if you do not know what IP address to use.
* Consult with your IT department if you do not know what IP address to use.
* Consult with your IT department if you do not know what IP address to use.
11. Click OK to close then click Close to go back to Network Connections.
12.
Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.
11. Click OK to close then click close to go back to network connections.
13. Close the Network Connections by clicking X on the upper right corner of Network Connections.
11. Click OK to close then click Close to go back to Network Connections.
12. Connect a network cable to the Ethernet port B9 on the diagram (page 2) to the switch on the local network.
12.
Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.
13. Close the Network Connections dialog.
13. Close the Network Connections by clicking X on the upper right corner of Network Connections.
11. Click OK to close then click Close to go back to Network Connections.
12.
Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.
13. Close the Network Connections by clicking X on the upper right corner of Network Connections.
Linux
1.
Double-click the Network icon
NOTE
Linux
1.
Double-click the Network icon
Linux
Linux®
2. Select 'Wired' that has arrows pointing up and down from the list (If neither of the "wired" are showing arrows up and downs, then make
1.
Double-click the Network icon
sure the network cable is connected to the PoE switch on the camera network from
1. Double-click the network icon
3. Click 'Options' at the bottom of the window.
NOTE
4. Click on the 'IPv4 Settings' tab.
5. From the drop-down menu, select connection type ("Method") as Manual.
6. Click 'Add' next to Addresses.
NOTE
The Blackjack® server's network settings are set to DHCP as default.
2. Select 'Wired' that has arrows pointing up and down from the list (If neither of the "wired" are showing arrows up and downs, then make
sure the network cable is connected to the PoE switch on the camera network from
3. Click 'Options' at the bottom of the window.
2. Select 'Wired' that has arrows pointing up and down from the list (If neither of the "wired" are showing arrows up and
4. Click on the 'IPv4 Settings' tab.
downs, then make sure the network cable is connected to the PoE switch on the camera network from
5. From the drop-down menu, select connection type ("Method") as Manual.
2. Select 'Wired' that has arrows pointing up and down from the list (If neither of the "wired" are showing arrows up and downs, then m
6. Click 'Add' next to Addresses.
3. Click 'Options' at the bottom of the window.
sure the network cable is connected to the PoE switch on the camera network from
4. Click on the 'IPv4 Settings' tab.
3. Click 'Options' at the bottom of the window.
4. Click on the 'IPv4 Settings' tab.
5. From the drop-down menu, select connection type ("method") as manual.
5. From the drop-down menu, select connection type ("Method") as Manual.
6. Click 'Add' next to addresses.
6. Click 'Add' next to Addresses.
7. Enter IP address then press tab on the keyboard to move to netmask.
8
on the Desktop
The Blackjack Cube's network settings are set to DHCP as default.
on the Desktop
The Blackjack Cube's network settings are set to DHCP as default.
NOTE
The Blackjack Cube's network settings are set to DHCP as default.
on the Desktop
STEP
1)
on the desktop.
STEP
1)
STEP
STEP
1)
1).