Hi-Flame GloFire 905 Installation And Operating Instructions Manual - Page 8

Browse online or download pdf Installation And Operating Instructions Manual for Electric Heater Hi-Flame GloFire 905. Hi-Flame GloFire 905 16 pages. Horse flame glofire 905 room heater - installation and operating instructions

Print Page

Chimney

DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM.

This room heater must be connected to a 6" factory built UL 103 HT chimney or a code-

approved masonry chimney with a flue liner.

Factory Built Chimney

When a metal prefabricated chimney is used, the manufacturer's installation instructions

must be followed. You must also purchase (from the same manufacturer) and install

the ceiling support package or wall pass-through and "T" section package, firestops

(where needed), insulation shield, roof flashing, chimney cap, etc. Maintain proper

clearance to the structure as recommended by the manufacturer. The chimney must be

the required height above the roof or other obstructions for safety and proper draft

operation. See page 8 for chimney termination requirements.

Page 7