ADEMCO TeleCommand User Manual - Page 16

Browse online or download pdf User Manual for Control Unit ADEMCO TeleCommand. ADEMCO TeleCommand 20 pages. Telephone module

Print Page

Miscellaneous Functions

The Trigger Function of your system may be configured by the

installer so that a light or other device can be turned on or off from

the telephone keypad using TeleCommand. Check with your installer

to have this feature set up.

To activate the Trigger Function:

1. Access TeleCommand by pressing the # key.

2. Enter your 4-digit TeleCommand User code.

3. Enter [✱] + [4] + [1].

TeleCommand will annunciate the status of the Trigger ON or

OFF.

4. To change the state of the Trigger, enter [✱] + [4] + [1}.

You may use TeleCommand to receive status of a Multi-Partition

system using the GoTo Command as described in you Security System

User Guide.

provided. An example of the GoTo Command used with ADEMCO

Security Systems follows:

[4-digit Security System Code] + [✱] + partition number (0,1,2,3).

TeleCommand will remain in the new partition until directed to go to

another partition, or until it automatically returns to the original

partition.

You may program zone descriptors using the premises telephone.

You can play back all zones with attached zone descriptions by

pressing the [✱] or [#] key when prompted to "enter 3 digit zone

number".

Annunciation of which partition you are in is not