Galanz W3A1G2-0E0 User Manual - Page 8

Browse online or download pdf User Manual for Dishwasher Galanz W3A1G2-0E0. Galanz W3A1G2-0E0 11 pages.

Galanz W3A1G2-0E0 User Manual
Cleaning dish washer
Clean the control panel, use wet cloth gently wipe and then dry thoroughly. Use good polishing
products to clean the exterior. Do not use any sharp objects, steel wool or fierce detergent to clean
any part of the dishwasher.
Anti-freezing protection
If the dishwasher is placed under 0℃ , you are suggested to find customer service for taking
following measures:
1. Cut off the dishwasher power.
2. Close water supply equipment and break connection between the inlet pipe and faucet.
3. Discharge remaining water from inlet pipe and water valve (catch the water with a plate).
4. Re-connect the inlet pipe and faucet.
5. Take out the filter from the tub and dry the water cup with sponge.also cause machine damage or
leave traces on the surface.
Cleaning door
Only soft wet cloth can be used for cleaning the door edge. Don't use any spray which may
penetrate into the door lock and electric element. Meanwhile, don't use objects with abradant to
wipe to prevent damaging the machine surface. Wiping with some tissue may also cause machine
damage or leave traces on the surface.
Attention:
The installation of the pipes
and electrical equipments
should be done by professionals.
How to Keep Your Dishwasher in Shape
After Every Wash
After each washing, please cut off the power and open the door to prevent dampness and odor
generation.
Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket. Do not run
risks.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning
products. Use only a cloth and warm soapy water. To remove spots or stains from the surface of the
interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made
specifically for dishwashers.
12
Warning
Electrical Shock Hazard!
Disconnect electrical power before
installing dishwasher.
Failure to do so can result in death or
electrical shock.
When you are on holiday
Before you are on holiday, please operate the dishwasher with "sterilizing" program, and then cut
off the power, close the water inlet and slightly open the door of the dishwasher.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can
be positioned on its back.
Seals
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the
seals. Periodic cleaning with a damp sponge will prevent this.
WARNING!
1. Please carefully read the Manual as it contains important information including safe installation,
operation and product maintenance.
2. Please keep the Manual in safe place for future reference.
3. If the product is sold, presented or moved, please make the Manual along with the machine for
new user's reference and benefit.
4. After pressing Pause, don't open the door before the machine stops operation to prevent burn
danger!
5. Watch out for the steam and hot water when opening the door!
6. Carefully check if the door is closed!
7. Before re-starting the dishwasher, please check the settlement of the tableware and confirm if
there is any tableware extending out from the bottom dish basket!
13