Galanz W3A1G2-0E0 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Galanz W3A1G2-0E0. Galanz W3A1G2-0E0 11 pagina's.

Pagina afdrukken

Cleaning dish washer

Clean the control panel, use wet cloth gently wipe and then dry thoroughly. Use good polishing

products to clean the exterior. Do not use any sharp objects, steel wool or fierce detergent to clean

any part of the dishwasher.

Anti-freezing protection

If the dishwasher is placed under 0℃ , you are suggested to find customer service for taking

following measures:

1. Cut off the dishwasher power.

2. Close water supply equipment and break connection between the inlet pipe and faucet.

3. Discharge remaining water from inlet pipe and water valve (catch the water with a plate).

4. Re-connect the inlet pipe and faucet.

5. Take out the filter from the tub and dry the water cup with sponge.also cause machine damage or

leave traces on the surface.

Cleaning door

Only soft wet cloth can be used for cleaning the door edge. Don't use any spray which may

penetrate into the door lock and electric element. Meanwhile, don't use objects with abradant to

wipe to prevent damaging the machine surface. Wiping with some tissue may also cause machine

damage or leave traces on the surface.

Attention:

The installation of the pipes

and electrical equipments

should be done by professionals.

How to Keep Your Dishwasher in Shape

After Every Wash

After each washing, please cut off the power and open the door to prevent dampness and odor

generation.

Remove the Plug

Before cleaning or performing maintenance, always remove the plug from the socket. Do not run

risks.

No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning

products. Use only a cloth and warm soapy water. To remove spots or stains from the surface of the

interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made

specifically for dishwashers.

Warning

Electrical Shock Hazard!

Disconnect electrical power before

installing dishwasher.

Failure to do so can result in death or

electrical shock.

When you are on holiday

Before you are on holiday, please operate the dishwasher with "sterilizing" program, and then cut

off the power, close the water inlet and slightly open the door of the dishwasher.

Moving the Appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can

be positioned on its back.

Seals

One of the factors that cause odors to form in the dishwasher is food that remains trapped in the

seals. Periodic cleaning with a damp sponge will prevent this.

WARNING!

1. Please carefully read the Manual as it contains important information including safe installation,

operation and product maintenance.

2. Please keep the Manual in safe place for future reference.

3. If the product is sold, presented or moved, please make the Manual along with the machine for

new user's reference and benefit.

4. After pressing Pause, don't open the door before the machine stops operation to prevent burn

danger!

5. Watch out for the steam and hot water when opening the door!

6. Carefully check if the door is closed!

7. Before re-starting the dishwasher, please check the settlement of the tableware and confirm if

there is any tableware extending out from the bottom dish basket!