Galanz W3A1G2-0E0 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Galanz W3A1G2-0E0. Galanz W3A1G2-0E0 11 pagina's.

Pagina afdrukken

Forget to Add Dish

A forgotten dish can be added any time before the detergent cup opens.

1. Press "Start/Pause" button

2. Open the dishwasher door

3. Pull out the dish basket and put in left-out tableware

4. Push back the dish basket into the dishwasher

5. Close the dishwasher door

6. Press Start and re-start the dishwasher

WARNING!

1. After pressing Pause, don't open the door before the machine stops operation to prevent burn

danger!

2. Watch out for the steam and hot water when opening the door!

3. Carefully check if the door is closed!

4. Before re-starting the dishwasher, please check the settlement of the tableware and confirm if there

is any tableware extending out from the bottom dish basket!

8. Maintenance and cleaning

The filtering system is equipped for preventing large food residue or other objects from entering the

washing pump. Food residue sometimes may block the filtering system.

Cleaning filter

1. Rotate to the left to take out the filter.

2. The filter is made of three parts; please disassemble to wash.

3. After cleaning, assemble the filter and then install back to the dishwasher.

Filter assembly

To obtain optimal cleaning performance and effect, the filter assembly must be cleaned. The filtering

net can remove food particles in water during the washing period. The entire filter assembly should

be cleaned once per week. Please use cleaning brush to clean the rough and fine filter, and reinstall

into the dishwasher. The dishwasher should not be used without filter or with improper filter,

otherwise, the equipment may be damaged, and the tableware washing performance may be

reduced.

WARNING!

1. Do not operate the dishwasher without filter installed.

2. During cleaning, do not knock on the filter which may cause filter deformation and lower washing

performance.

Cleaning Sprayer

Sprayer

should be cleaned periodically, as the substances in tap water may block the

and spinning axle. Use mild soap water rinse the sprayer and brush gently the opening. Completely

rinse clean and install back to the dishwasher.

WARNING!

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical

component. It is not allowed to use the abrasive agent or some paper towel because of the risk of

scratching or leaving spots on the stainless steel surface.

Cleaning limescale

In areas with harder water quality, white lime scale may accumulate on the tub and heating plate

of the dishwasher. Lime scale will impact heating effect of the heating panel. Thus, the heating

panel should be cleaned periodically.

After lime scale generation, remove the filter and place into the dish basket. Start the "Intensive"

program of the dishwasher (no other tableware should be placed in the dish basket). After an

operation period of 2-10 minutes, press Pause and open the dishwasher. Add amount 100ml

vinegar or 50g anti-scaling agent. After the program operation stops, there may be a small amount

of lime scale film on the heating plate, you may take a towel and gently wipe away the thin film. If

there is any vinegar smell or anti-scaling agent residue in the dishwasher, you can operate the

"Sterilizing wash" for removal without any tableware or detergent placed in the dishwasher.

Notes

If the lime scale accumulate excessively, add more vinegar or anti-scaling agent with vinegar of over

200ml and anti-scaling agent between 75 and 150g. After cleaning, use a towel or brush to clean the

heating plate.

sprayer holes

Pull out upward the

sprayer

Use fine tool to clean the the sprayer

holes