Galanz W3A1G2-0E0 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Galanz W3A1G2-0E0. Galanz W3A1G2-0E0 11 pagina's.
Pagina afdrukken
9. Troubleshooting Tips
ERROR CODES
When some malfunctions happen, the appliance will display error codes to warn you.
Meaning
Codes
1.Part damage (inlet valve damage, flow meter damage).
2.No water flow in (water tap not on, inlet pipe not connected to
Water inlet
LED1+LED11
the inlet valve).
warning
3. Line break (conductor connector of flow meter is off).
Temperature
LED2+LED5
Open circuit or short circuit of temperature sensor.
sensor warning
Water leaks, washing pump stops work and the micro switch
Water shortage
LED5+LED10
is off.
warning
Heating panel is not heating, temperature controller on the
heating panel is off (one temperature controller should be
LED5+LED11
Heater warning
restored manually and the other automatically).
High water
LED2+LED10
Water flow volume exceeds setting value.
level warning
9
In case of any error, corresponding indicator light on the control panel of dishwasher will flash (refer to
the "schematic diagram of indicator light" for specific position of the indicator lights):
14
Possible Cause
5
1
2
10
Start
Pause
DIY
Intensive
Eco
Rapid
11
12
Before Calling for Service
Reviewing the charts on the following pages may make you be free of calling for service.
Problem
Possible cause
Ensure the power plug has correctly connected to
power source.
Power supply is not
The
Ensure the dishwasher has been powered on and
turned on
dishwasher
the door is well closed.
does not run
Check the water supply equipment and ensure the
Water pressure is low
faucet is turned on.
Tableware in the basket
Well place each tableware and avoid collision with
not well placed drops off
the sprayer.
and collides with the
sprayer
Noise
Mechanical sound
Sound generated from water flow rinsing the
tableware
The dishwasher is not used frequently. If so, ensure
Sound of the washing
water inlet and discharge every week, which will help
pump
keep the sealing moisturized.
To avoid bubble generation, please use detergent
powder especially designed for dishwasher.
Improper use of
If bubble generates, first open the dishwasher to let
Bubble in tub
detergent powder
the bubble evaporate, close the machine door and
start Fruit & Vegetable washing program to discharge
water; repeat the above procedure until the bubble
are cleared.
Excessively hard water
Remove dots on glass cups
1.
Excessively low
1.
2.
temperature of inlet
2.
water
Dots and
3.
Overload use of the
3.
membrane
4.
dish washer
substance on
tableware
4.
Incorrect loading
5.
Use overdue or damp
5.
detergent washerinlet
6.
water
Wrong adding of
6.
detergent powder
Troubleshooting
Take out all metal devices in the dishwasher
Do not add detergent powder
Choose the longest washing program
Start the dishwasher and operate for 18-22
minutes, then the machine will enter main washing
process.
Open the dish washer, pour two spoons of vinegar
into the bottom inner container.
Close the door of the dishwasher and complete
the washing program. If the vinegar does not
work, repeat the above procedure and use 1/4
spoon (60ml) of lemon juice crystal to replace the
acetic acid.
15