Deagostini Model Space HUMMER H1 Manual - Page 12

Browse online or download pdf Manual for Toy Deagostini Model Space HUMMER H1. Deagostini Model Space HUMMER H1 18 pages.

Print Page

HUMMER H1: STEP BY STEP

1 1

Next, wrap the brake rod

(Stage 46) in a piece of

folded paper towel.

5 5

7 7

Your servo horn and brake rod assembly should look like this.

Hold the throttle linkage

rod (Stage 46) with

the needle-nose pliers,

covering it with a piece

of folded paper towel

or tissue for protection.

Screw the throttle ball end

(also Stage 46) onto the

threaded tip.

3 3

Carefully turn the servo

horn from right to left

until the tip of the rod

makes its way through to

the other side.

2 2

Turn the ball end until the remaining visible portion

of the threaded section measures 2mm.

Holding the brake rod

with the needle-nose

pliers, line up the tip of the

rod with the circled hole

on the servo horn. Make

sure you have the servo

horn the right way round,

with the recessed circle in

the central portion facing

upwards, as shown.

6 6

Insert a 2 × 8mm self-

tapping screw (Stage 46)

into the stepped/recessed

hole in the centre of the

linkage base (also Stage

46).

216

2mm

4 4

Push the front of the

servo horn down (upper

arrow) while lifting the

back up (lower arrow)

Keep going until the

portion of the rod that

appears vertical in the

photo is in the hole of

the servo horn.

8 8

™