agui OKATT DNP16-01 Manual For Installation And Use - Page 6

Browse online or download pdf Manual For Installation And Use for Lifting Systems agui OKATT DNP16-01. agui OKATT DNP16-01 9 pages. Pivoting buffer support

Print Page

DNP16-01

By: E. Irazu.

Reviewed by: J. Fernández

(Regulation 35-49)



Positioning and assembly of pulleys and cables:

In order for the activation and deactivation system to operate correctly from outside the pit, it is very

important that the cables are properly guided into position. Pulleys are provided with the cables for this

purpose. The role of these pulleys is to guide the insertion of the cables to avoid excessive angles or

entrapment. The image shows how to position these pulleys.

Pulleys 1 and 2 are placed on the floor of the pit to align the

cable with the opening mechanism.

Pulley 3 is placed on the pit to guide the insertion of the cable

through the holes on the buffer support, to ensure they enter

smoothly.

Once the cables have been fed through correctly, the ends are

drawn up to the mouth of the pit (elevator door) and secured

with a ring clamp so that they can be grasped from outside

the pit.

MANUAL FOR INSTALLATION AND USE

DNP16-01. PIVOTING BUFFER SUPPORT

BRAND PRODUCT

DEPARTMENT

(Regulation 50-80)

Cable aligned

horizontally

PULLEY 3

PULLEY 2

PULLEY 1

Rev:2