Gamma 6004 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Stringing Machines Gamma 6004. Gamma 6004 19 pages. 6 point mounting
Also for Gamma 6004: Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages)

Print Page

ASSEMBLY INSTRUCTIONS

Bellows Installation

The bellows assembly is supplied in two

pieces and should be assembled as follows.

Place the bellows section with the flange

over the upper support column with the

flange on the top. Place the remaining bel-

lows over the upper support column and

mate it with the flange on the lower bellows.

Tool Tray Installation

Lower the tool tray over the top of the upper

column support and let it rest loosely on the

bellows assembly.

Tension Track Installation

Place the tube of the tension track assembly

over the top of the upper column support.

Align the tension track with the long leg of the

base assembly. Securely tighten the two

socket set screws on the tension track as-

sembly tube, locking it to the upper column

support. Align the notch in the tool tray with

the tension track bar while raising the tool

tray. Secure the tray with the set screws in

the side of the tray casting.