Gamma 6004 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Stringing Machines Gamma 6004. Gamma 6004 19 pages. 6 point mounting
Also for Gamma 6004: Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages)

Print Page
Gamma 6004 Owner's Manual
ASSEMBLY INSTRUCTIONS
Turntable Installation
Remove the nuts from underneath of the
turntable. Position the 4 screws over the
flange of the turntable pin. Engaging the
turntable brake helps position the screws.
Attach the turntable to the turntable pin
flange using the 4 included M6 cap screws.
Tighten securely.
Height Adjustment
The turntable height can be adjusted to suit
the stringer. To adjust, loosen the two set
screws on the lower column support post
below the bellows assembly. Adjust the
amount of engagement between the upper
and lower column supports until the desired
height is attained. Make sure that the tension
track is still aligned with the long leg of the
base and tighten the two set screws to lock
the upper support column into place.
5