Gamma 6004 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 19 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)

페이지 인쇄
Gamma 6004 소유자 매뉴얼
ASSEMBLY INSTRUCTIONS
Turntable Installation
Remove the nuts from underneath of the
turntable. Position the 4 screws over the
flange of the turntable pin. Engaging the
turntable brake helps position the screws.
Attach the turntable to the turntable pin
flange using the 4 included M6 cap screws.
Tighten securely.
Height Adjustment
The turntable height can be adjusted to suit
the stringer. To adjust, loosen the two set
screws on the lower column support post
below the bellows assembly. Adjust the
amount of engagement between the upper
and lower column supports until the desired
height is attained. Make sure that the tension
track is still aligned with the long leg of the
base and tighten the two set screws to lock
the upper support column into place.
5