Gamma 6004 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 19 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)
페이지 인쇄
ASSEMBLY INSTRUCTIONS
Base Leg Assembly
The GAMMA 6004 stringing machine uses a
four leg base design. The legs must be
assembled to the support post before use.
Remove the lower column support from the
carton.
Align the holes in the leg flange with the
matching holes in the lower column support
post. Secure the leg with one FLAT HEAD
cap screw through the upper hole, and one
SOCKET HEAD cap screw through the bot-
tom hole. Repeat this procedure for the
three remaining legs.
Upper Column Support Assembly
Insert the upper column support into the
lower column support / base leg assembly.
Leave the upper column extended to maxi-
mum height and lock in place with the two set
screws located at the top of the lower column
support.
3