Gamma 6004 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma 6004. Gamma 6004 19 stron. 6 point mounting
Również dla Gamma 6004: Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony)

Drukuj stronę

ASSEMBLY INSTRUCTIONS

Base Leg Assembly

The GAMMA 6004 stringing machine uses a

four leg base design. The legs must be

assembled to the support post before use.

Remove the lower column support from the

carton.

Align the holes in the leg flange with the

matching holes in the lower column support

post. Secure the leg with one FLAT HEAD

cap screw through the upper hole, and one

SOCKET HEAD cap screw through the bot-

tom hole. Repeat this procedure for the

three remaining legs.

Upper Column Support Assembly

Insert the upper column support into the

lower column support / base leg assembly.

Leave the upper column extended to maxi-

mum height and lock in place with the two set

screws located at the top of the lower column

support.