Gamma 6004 Kullanıcı El Kitabı - Sayfa 4

Tel Çekme Makineleri Gamma 6004 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma 6004 19 sayfaları. 6 point mounting
Ayrıca Gamma 6004 için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar)

Sayfayı Yazdır
Gamma 6004 Kullanıcı El Kitabı
ASSEMBLY INSTRUCTIONS
Base Leg Assembly
The GAMMA 6004 stringing machine uses a
four leg base design. The legs must be
assembled to the support post before use.
Remove the lower column support from the
carton.
Align the holes in the leg flange with the
matching holes in the lower column support
post. Secure the leg with one FLAT HEAD
cap screw through the upper hole, and one
SOCKET HEAD cap screw through the bot-
tom hole. Repeat this procedure for the
three remaining legs.
Upper Column Support Assembly
Insert the upper column support into the
lower column support / base leg assembly.
Leave the upper column extended to maxi-
mum height and lock in place with the two set
screws located at the top of the lower column
support.
3