- ページ 6

ストリング・マシン Gamma 6004のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma 6004 19 ページ。 6 point mounting
Gamma 6004 にも：オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ)

ASSEMBLY INSTRUCTIONS

Turntable Installation

Remove the nuts from underneath of the

turntable. Position the 4 screws over the

flange of the turntable pin. Engaging the

turntable brake helps position the screws.

Attach the turntable to the turntable pin

flange using the 4 included M6 cap screws.

Tighten securely.

Height Adjustment

The turntable height can be adjusted to suit

the stringer. To adjust, loosen the two set

screws on the lower column support post

below the bellows assembly. Adjust the

amount of engagement between the upper

and lower column supports until the desired

height is attained. Make sure that the tension

track is still aligned with the long leg of the

base and tighten the two set screws to lock

the upper support column into place.