Makita BJV180 Technical Information - Page 5

Browse online or download pdf Technical Information for Power Tool Makita BJV180. Makita BJV180 13 pages. Cordless jig saw
Also for Makita BJV180: Parts Breakdown (3 pages), Specification Sheet (2 pages), Instruction Manual (13 pages), Instruction Manual (13 pages), Instruction Manual (13 pages), Instruction Manual (18 pages)

Print Page

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Gear Housing Cover Section (cont.)

DISASSEMBLING

5) Disassemble Gear housing cover section by following the steps 1 to 5 described below in Fig. 8 to Fig. 11.

Fig. 8

Gear housing cover section

(viewed from Motor housing side)

Slider

Pin 4

(268090-1)

Rod

Fig. 10

4. Pull off Rod from

Gear housing cover

complete.

ASSEMBLING

1) Assemble Pin 4 (256117-9) and Plane bearing 4 to Leaf spring if they are removed.

2) Put Leaf spring in place into Gear hosing cover complete. (Fig. 12)

3) Assemble Blade holder section to Gear housing cover complete as illustrated in Fig. 13.

Fig. 12

Gear housing cover complete

Leaf spring

Pin 4 (256117-9)

Plane bearing 4

Note: Plane bearing 4 must be placed

on Motor housing side.

Gear housing cover complete

1. Remove Stop ring E-3

from Pin 4 (268090-1)

with a small slotted

screwdriver.

Stop ring E-3

Fig. 11

5. By unscrewing four M4x10 Pan head screws, Gear housing cover section

can be disassembled as illustrated below.

Pan head screw

M4x10 (4 pcs)

Fig. 13

Motor housing side

through hole

Fig. 9

3. Disconnect Slider from Rod

by pulling Pin 4 (268090-1)

in the direction of the arrow.

2. Pull down Rod until it stops.

Gear housing

cover complete

Note: The through hole of Rod and

Rod

hook

Blade holder

P 5 /13

Pin 4 (268090-1)

Slider

Linear guide

(2 pcs)

Leaf spring

[with Pin 4 (256117-9)

and Plane bearing 4]

the hook of Blade holder

must be placed as illustrated

to left.

Motor housing side

Blade holder section