Makita BJV180 Technical Information - Page 6

Browse online or download pdf Technical Information for Power Tool Makita BJV180. Makita BJV180 13 pages. Cordless jig saw
Also for Makita BJV180: Parts Breakdown (3 pages), Specification Sheet (2 pages), Instruction Manual (13 pages), Instruction Manual (13 pages), Instruction Manual (13 pages), Instruction Manual (18 pages)

Print Page

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Gear Housing Cover Section (cont.)

ASSEMBLING

4) Put Slider on Rod while aligning the two holes of Slider with the hole of Rod, and insert Pin 4 (268090-1) through

the aligned through holes from left side as illustrated to right in Fig. 14.

5) Swivel Slider in the direction of the black arrow, and insert two Linear guides to each side of Slider. (Fig. 15)

Fig. 14

Gear housing cover complete

Rod

Slider

6) Lay down Linear guides on Gear housing cover complete while lifting up Leaf spring, and place Leaf spring on

Linear guides. (Fig. 16)

7) Push Slider to the center of Linear guides. Fasten Leaf spring through Linear guides to Gear housing cover complete

with two M4x10 Pan head screws, then fasten Linear guides to Gear housing cover complete with the other two

M4x10 Pan head screws. (Fig. 17)

8) Assemble Stop ring E-3 to Pin 4 (268090-1) as illustrated in Fig. 18.

Note: Check whether Slider reciprocates smoothly on Linear guides. If not, Linear guide(s) can be tilted.

In this case, reassemble Linear guide(s) to Gear housing cover complete correctly.

Fig. 16

[Gear housing cover section viewed from A]

Linear guide

Gear housing cover complete

Fig. 17

Push Slider to

the center of

Linear guides.

Linear guide

Pin 4

(268090-1)

Slider

Leaf spring

Pan head screw M4x10 (4pcs)

Leaf spring

Fig. 15

Slider

Rod

Linear guide, set in place

between Leaf spring and

Gear housing cover complete

Fig. 18

Linear guide

Slider

Pin 4 (268090-1)

Rod

P 6/13

Linear guide (2pcs)

Rod

Leaf spring

Stop ring E-3