Makita BJV180 Informações técnicas - Página 5
Procurar online ou descarregar pdf Informações técnicas para Ferramenta eléctrica Makita BJV180. Makita BJV180 13 páginas. Cordless jig saw
Também para Makita BJV180: Repartição das peças (3 páginas), Ficha de especificações (2 páginas), Manual de instruções (13 páginas), Manual de instruções (13 páginas), Manual de instruções (13 páginas), Manual de instruções (18 páginas)
Imprimir página
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear Housing Cover Section (cont.)
DISASSEMBLING
5) Disassemble Gear housing cover section by following the steps 1 to 5 described below in Fig. 8 to Fig. 11.
Fig. 8
Gear housing cover section
(viewed from Motor housing side)
Slider
Pin 4
(268090-1)
Rod
Fig. 10
4. Pull off Rod from
Gear housing cover
complete.
ASSEMBLING
1) Assemble Pin 4 (256117-9) and Plane bearing 4 to Leaf spring if they are removed.
2) Put Leaf spring in place into Gear hosing cover complete. (Fig. 12)
3) Assemble Blade holder section to Gear housing cover complete as illustrated in Fig. 13.
Fig. 12
Gear housing cover complete
Leaf spring
Pin 4 (256117-9)
Plane bearing 4
Note: Plane bearing 4 must be placed
on Motor housing side.
Gear housing cover complete
1. Remove Stop ring E-3
from Pin 4 (268090-1)
with a small slotted
screwdriver.
Stop ring E-3
Fig. 11
5. By unscrewing four M4x10 Pan head screws, Gear housing cover section
can be disassembled as illustrated below.
Pan head screw
M4x10 (4 pcs)
Fig. 13
Motor housing side
through hole
Fig. 9
3. Disconnect Slider from Rod
by pulling Pin 4 (268090-1)
in the direction of the arrow.
2. Pull down Rod until it stops.
Gear housing
cover complete
Note: The through hole of Rod and
Rod
hook
Blade holder
P 5 /13
Pin 4 (268090-1)
Slider
Linear guide
(2 pcs)
Leaf spring
[with Pin 4 (256117-9)
and Plane bearing 4]
the hook of Blade holder
must be placed as illustrated
to left.
Motor housing side
Blade holder section