Jamr Technology B02T User Manual - Page 9
Browse online or download pdf User Manual for Blood Pressure Monitor Jamr Technology B02T. Jamr Technology B02T 17 pages.
Print Page5.4. Measure Procedure
Refer to picture-07
The monitor is designed to take measurements and store the measurement
values in memory for two people using User ID A and User ID B.
1. Sit comfortably in a chair with your feet flat on the floor.
2. Select your User ID (A or B).
Stretch your arm forward on the desk and keep relaxing, make sure the palm
of hand is upturned. Make sure arm is in correct position, to avoid body
movement. Sit still and do not talk or move during the measurement.
After the cuff has been appropriately positioned on the arm and connected
to the blood pressure monitor, the measurement can begin:
1 ) Operate via the App on smart phone with Bluetooth
Install the App from Google play store or Apple app store. Open Bluetooth on
smart phone, and then Turn on the App, the home interface will show up as
picture App 01. Please refer the below steps tell how to remote control on the
App:
a)Complete My Profile
Click the SET button on the top left corner as picture App 02, then select My
Profile button to edit and save user information (male/female, name, age,
height and weight) as picture App 03.
b)Setting Language
After setting My Profile, back to select and save the BM monitor Language as
picture App 04.
App01
App02
App03
c)Connect Bluetooth
After the setting is finished, click the HOME button on the top right corner as
picture App 01, then select Bluetooth Device button. A moment later, the
device will be connected as picture App 05 and App 06.
App04
App05
d)Start the measurement
Once the Bluetooth is connected, click the "START" button on the App to start
the testing as picture App 06. When measuring is done, the assessment will
be voiced out and a interface about checking the result will show up as
picture App 07 and App 08.
App07
App06
App08