A&L Furniture Bradford Pergola Assembly Instructions - Page 2

Browse online or download pdf Assembly Instructions for Outdoor Furnishing A&L Furniture Bradford Pergola. A&L Furniture Bradford Pergola 4 pages.

Print Page
PARTS
(included)
Post (4)
Brace (8)
Beam Assembly (2)
Crossbeam (4)
Rafter (5 or 7)
E
Top Strip (7)
F
Note: Some parts and hardware counts
vary based on pergola size (6x8 or 8x8)
STEP 1
Attach a brace to one of the posts using the 3" screws. (See photo 1.) Make sure this is on the notched end
of the post. Insert the post into the beam assembly. (See photo 2.)
b
b
A
STEP 2
Attach another brace into the corner of the post and beam assembly. (See photo 3.) You may have to pull
the bottom of the post one way or the other to square it up before you fasten the brace. Put 2 screws
through the beam into the top of the post. (See photo 4.) Repeat steps 1 & 2 for the other 3 posts.
b
b
b
B
b
photo 1
b
b
b
photo 3
HARDWARE
(included)
5
/
" x 3¼" Bolt (10 or 14)
a
16
3" Screws (150)
b
2" Lags (8)
c
Flange Nut (10 or 14)
d
Swing Hanger (4)
e
Square Drive Bit (1)
f
TOOLS NEEDED
8' Step Ladder
½" Wrench or Socket
Screw Gun
Power Drill
4 or 5 Helpers
B
C
B
A
photo 2
a
a
C
A
photo 4